Skip to content

All Flash High Performance 8 X 16Gb Fibre SAN Storage – CEI-826-FXD

CAEN_SAN_2U26_R_Small   CAEN-Hotplug2

The CAEN CEI-826-FXD All Flash High Performance 26-bay 16Gb Fibre SAN storage system features two Dual-Active (Active/Active) controllers, Intel’s latest D1500 processor, cutting edge 12Gb SAS 3.0 technology, 4 x 16Gb and 2 on-board 10GBase-T ports per Controller plus the latest SANOS 4.0 (SAN Storage Management Operating System v4.0) by QSAN.
The CAEN CEI-826-FXD Fibre SAN storage system offers next-generation storage with blazing fast CPU power, 8Gb DDR4 ECC standard system memory (Expandable to 64Gb per Controller), mind blowing performance, high availability, unparalleled scalability, suitable for enterprise level and SMB storage requirements. The CEI-826-FXD was designed to be an ideal solution for enterprise, cloud data centers, and remote branch office (ROBO) deployments.
The CEI-826-FXD features a Dual-Active controller architecture, both controllers concurrently provide storage services in real time. Active-Active architecture doubles the available host bandwidth and cache hit ratio, ensuring maximum utilization of system resources and maximized throughput. If one controller fails, the other controller can transparently take over all storage services. In addition to storage services, management service can transparently pass to the secondary controller.
The CEI-826-FXD is a highly-available Fibre SAN storage system. All of the critical components in the CEI-826-FXD are hot pluggable and designed with full redundancy. This design allows the system to withstand multiple component failures and achieve 99.999% availability.
  • Lowest per GB Cost on the Market
  • Up to 300K IOPS
  • Best Price Performance Ratio
  • Dual-Active (Active/Active) controllers
  • Built-in 2 X 10GbE iSCSI / Cont.
  • Up To 4 X 16Gb Fibre / Cont.
  • 5th-gen Intel D1500 Quad core processor, up to 64GB RAM per controller
  • Thin Provisioning, Snapshot, Cache Mirroring through NTB Bus
  • Two optional flexible I/O host cards – 10G SFP+ 8 ports
  • Local clone and remote replication for disaster recovery
  • Virtualization support for VMware VAAI, Microsoft Hyper-V ODX, KVM, and Citrix
  • Cache-to-Flash memory protection technology
  • Scale up solution supports over 4.4PB of raw storage capacity
  • RAID level 0 ,1 ,0+1 ,3 ,5 ,6 ,10 ,30 ,50, 60, and N-way mirror
  • Flexible storage pool ownership
  • Thin Provisioning (QThin) with space reclamation
  • Global, local, & dedicated hot spares
  • Write-through & write-back cache policy
  • Online disk roaming
  • Support RAID member disks across enclosure boundary
  • Background I/O priority setting
  • Instant RAID volume availability
  • Fast RAID rebuild
  • Online storage pool expansion
  • Online volume extension / migration
  • Auto volume rebuilding
  • Instant volume restoration
  • Online RAID level migration
  • Support video editing mode for enhanced performance
  • Support disk drive health check & S.M.A.R.T attributes
  • Storage pool parity check and media scan for disk scrubbing
  • Local Clone
  • High availability design with no single point of failure
  • Latest 12Gb SAS 3.0 drive technology

sidebtn_datasheet_en   sidebtn_quotation_en   sidebtn_question_en

Technical Specifications

RAID Controller Dual-Active/Active
Host Connectivity (per controller) Built-in 2 x 10GBASE-T iSCSI (RJ45) ports Built-in 1 x 1GbE management port
Host Card Slot 1 (per controller) 4 x 16Gb Fibre (SFP) ports per Cont.
Host Card Slot 2 (optional) 4 x 10GbE iSCSI (SFP+) ports (Slot 2 provides 20Gb bandwidth) OR 4 x 1GbE iSCSI (RJ45) ports
Processor Intel® D1500 family quad core processor
Memory (per controller) DDR4 ECC 8GB, up to 64GB
Disk Drives Native 12Gb SAS back-plane, 960GB, 1.92TB, 3.84TB SATA3, and 4TB SAS 6.0Gb/s 2.5″ SSD
Expansion Connectivity (per controller) 2 x mini-SAS HD (SFF-8644) ports on-board
Expansion Enclosure JX JBOD series 12Gb SAS expansion enclosure / 826JXD (SFF 26bay)
Max. # of drives 446
Form Factor 2U 26-bay
Dimensions (H x W x D) 19” Rack-mount 3.5 x 17 x 19 in
LCM USB LCM (optional)
Memory Protection Cache-to-Flash module (optional), Super capacitor module + Flash module : Protect up to 16GB memory
Power Supply 80 PLUS Platinum, two redundant 770W (1+1)
AC Input: 100 – 127V 10A, 50-60Hz,

200 – 240V 5A, 50-60Hz

DC Output: +12V 63.4A

+5VSB 2.0A

Fan Module 2 x hot pluggable/redundant fan modules
Temperature Operating temperature : 0 to 40°C

Shipping temperature : -10°C to 50°C

Relative Humidity Operating: 20% to 80% non-condensing

Non-Operating: 10% to 90%

Supported Host OS VMware, Citrix, Hyper-V, KVM, Windows Server 2008, 2008 R2, 2012, 2012 R2, 2016; SLES (SUSE Linux Enterprise Server) 10, 11, 12; Red Hat
Warranty Please refer to our Warranty Support section






There is no ads to display, Please add some


SSD Solutions