Skip to content

High Density Cloud 12Gb/s SAS DAS Solution – CEI-864S / CEI-864SD

4643_hd  

High Density Cloud 12Gb/s SAS Solution: CEI-864S / CEI-864SD

The CAEN CEI-864S SAS RAID array is a High-Density Storage product built for huge data storage applications, data center or cloud computing. The CEI-864S RAID features 12Gb/s SAS host performance to increase system efficiency and performance. It features high capacity expansion, with 64 hot-swappable SAS2/SATA3 hard disk drive bays in a 19-inch 4U rack mount unit, scaling to a maximum storage capacity in the terabyte range. The  CEI-864S also supports optional dual controllers which provide better fault tolerance and higher reliability of system operation.

Engineered to meet stringent demands for continuous availability, CEI-864S 12Gb/s SAS RAID array spotlights a brand-new 1.2GHz Dual Core RAID-On-Chip processorGeneration3 PCI-E internal busDDR3 cache, completely cableless SAS backplane-based design with SES capabilities.

Low service and integration costs are assured by the CAEN Eng’s cableless design, dual redundant hot-swappable power supplies with two independent power inputs, turbo cooling fans, and embedded RAID controller. Three year warranty comes standard with every Fibre Channel array and covers all components.

FEATURES & HIGHLIGHTS

  • DataBolt™ Bandwidth Optimizer for balancing faster host & slower SAS or SATA devices
  • Supports SSD automatic monitor clone (AMC) to extend SSD lifetime
  • Supports Self-Encryption Drive (SED)
  • Supports Clone disk
  • Encryption at Rest Support ISE, TCG, SED, SSD with Block Erase & Password Protect

ADVANCED FEATURES

  • 12Gb/s SAS host performance
  • Encryption at Rest Support ISE, TCG, SED, SSD with Block Erase and Password Protect
  • Dual-active RAID controller with cache mirroring through dedicated high-speed bus
  • Automatic synchronization of firmware version in the dual-active mode
  • Redundant controller operation with active/active and failover/failback function
  • Redundant flash image for controller availability
  • Management port seamless take-over
  • DataBolt™ Bandwidth Optimizer for balance faster host and slower SAS or SATA devices
  • RAID level 0, 1,10(1E), 3, 5, 6, 30, 50, 60, 00, 100, Single Disk and JBOD
  • Support for native 4K and 512 byte sector SAS and SATA devices
  • Support HDD firmware update
  • SSD automatic monitor clone (AMC) support
  • S.M.A.R.T. support
  • Low power consumption & Low heat production
  • Support intelligent power management to save energy and extend service life
  • Access terminal menu by telnet via a LAN port
  • API library for customer to write its own monitor utility
  • Field-upgradeable firmware in flash ROM
  • Firmware-embedded manager via RS-232 port
  • Firmware-embedded Web Browser-based RAID manager allows local or remote management
  • and configuration
  • SAP management utility to easily manage multiple RAID units in the network

sidebtn_datasheet_en    sidebtn_quotation_en    sidebtn_question_en

  • SSD 2.5″480GB, 600GB, 800GB, 1TB and 2TB – 864FD dual controller requires MUX adapters
  • SATA 3.5″1TB-12TB (7,200 rpm) – 864F single controller only
  • SAS 3.5″1TB-12TB (7,200 rpm) – 864F and 864FD
  • SAS 2.5″450GB, 600GB, 900GB, 1.2Tb and 1.8TB (10,000 rpm)
  • Full 48-bit ATA addressing standard support
  • S.M.A.R.T., NCQ, and OOB Staggered Spin-up capable drives supported.
  • Per enclosure maximum capacity of 768TB when using 12TB SAS or SATA drives.

TECHNICAL SPECIFICATIONS

RAID Controller CEI-864S: Single / CEI-864SD: Dual
Host Ports Two, 12Gb/s SAS per controller
Disk Interface 6Gb/s SAS/SATA and 12Gb/s SAS
Expansion Ports One, 6Gb/s SAS (SFF-8644) per controller
Drives (unit) 64 Total, 2.5″ / 3.5”, up to 128 total with 64 Bay JBOD addition
Processor type 1.2GHz Dual Core RAID-On-Chip processor
Cache memory 4GB (default) – 16GB (optional) DDR3 ECC SDRAM
Battery backup Optional
Management / Monitor port support Two, RJ11/232 and One, RJ45 Ethernet port
SMTP manager and SNMP agent Yes

ENCLOSURE

Tray lock Yes
Disk status indicators Access / Fail LED
Single Backplane SAS2 / SATA3 Cableless
PS/Fan modules 1100W 80plus x2 w/PFC
Turbo Fans Fifteen
Power AC 100V ~ 240V Full Range, 15A ~ 7.5A, 47Hz ~ 63Hz
Default Slide Rail: Post to Post 800mm~1090mm (32”~42”) / Option: Post to Post 750mm~900mm (29”~35”)

ENVIRONMENTAL

Relative Humidity 10% to 85% non-condensing (operating),
5% to 95% non-condensing (non-operating)
Operating Temperature 50°F – 104°F (10°C ~ 40°C)
Physical Dimensions (W x D x H) 19″ wide, 35″ deep, 7″ (4U) high
Weight (Without drives) 96 lb. / 43.5 kg.

COMPATIBILITY

Operating Systems VMWare ESX Server, vSphere, Windows Server 2012 (Cluster), Windows Server 2008, Windows Server 2003, XenServer, Oracle/Solaris, Linux, MAC OS X, and others to be announced
Safety / EMI RoHS, CE, FCC, BSMI, UL, cUL
Warranty Please refer to our Warranty Support section

Categories

SAS Solutions

Leave a Reply